Product Focus: Deck Doc Premium Decking Oil
Looking for a decking oil that actually lasts? Deck Doc Premium Decking Oil is our tried and tested flagship formula built for Aussie weather and high foot traffic. Whether you have a busy family deck, outdoor entertaining area, or a commercial timber space, Deck Doc's decking oil locks in colour, preserves the natural beauty of your timber, and reduces maintenance over time.
Made from natural ingredients and free from toxic additives, Deck Doc Premium Decking Oil nourishes your timber, protecting it from moisture, cracking, and warping. It’s the no-fuss solution for long-lasting results, helping your deck look great year after year without constant upkeep. Perfect for all types of timber decking, this premium formula penetrates deeply to lock in oils and tannins, repel damaging moisture, and maintain the integrity of your timber even in extreme weather conditions.
Why Deck Doc Premium Decking Oil?
Our flagship product is expertly engineered to withstand high foot traffic and resist scuffing. Perfect for timber decking.
KEY BENEFITS
- Resits Scuffing
- Withstands High Foot Traffic
- Perfect for Timber Decking
- Locks in Colour
- Locks in Oils & Tannins
- Protects Against Warping
- Protects Against Cracking
- Repels Damaging Moisture
- Flexes & Moves With Timber
- No Need To Weather Timber
- No Need To Detannise Timber
- Prevents Timber Drying Out
- Reduces Merbau Bleeding
'1L of Premium Decking Oil Covers 12-15 SQM'
How To Apply
Make sure the surface of your timber deck is clean and dry and free from old finishes. For best results, use Deck Doc Timber Cleaner before applying. Apply in dry, sunny weather between 15°C and 29°C. Avoid applying in direct, intense sunlight or on wet timber. Approximately 1 Litre covers 12–15 m², depending on timber density, moisture content, and surface roughness.
Step 1 - Shake Well. Shake the bottle thoroughly before opening and using.
Step 2 - Apply Light Coats. Use an applicator like our Applicator Kit to apply a light, even coat. Remember, less is more. Avoid applying too much oil at once, the timber can only absorb a limited amount.
Step 3 - Work Methodically. Work the oil evenly across the surface, both lengthwise and across the grain. Focus on small sections at a time to ensure full coverage.
Step 4 - Remove Excess. Wipe off any oil that hasn’t been absorbed into the timber to prevent sticky residue.
'Only 1 Coat of Premium Decking Oil is Required'
Aftercare
In most cases, you don't need extra coats unless your timber is very weathered. Always make sure the first coat is completely dry before reapplying. Deck Doc Premium Decking Oil is designed to work with raw or previously oiled timber only never use it on surfaces that have been sealed with solid coatings. If you’re unsure, test a small patch first to check that the timber absorbs the oil properly.
Feed it when it needs it! Reapply coats for added protection or to refresh it. To check if the timber is still protected, simply see if water still beads off the timber. If it does, it’s still well-protected. For best long-term results, we recommend giving your timber a refresh once a year: clean it down with Deck Doc Timber Cleaner and apply a light coat of oil to keep it looking great and protected from the elements.
Where to Buy
You can purchase deckdoc.com.au or call 1300 372 711 or from one of our stockists.
